Hunter Industries - PGV101GS - 1 Inch Residential and Light Commercial Globe Valve, Slip x Slip

Brand: Hunter Industries    SKU: PGV-101G-S

Product Overview

The Hunter PGV-101-G-S is a 1-inch screw-top irrigation valve with slip inlet and outlet connections plus an integrated flow-control stem. The Big Frog Supply SKU is stored as PGV-101G-S. It is designed for residential and light-commercial solvent-weld PVC systems that need a 24 VAC control valve with local flow adjustment.

Hunter rates the 1-inch PGV family for approximately 0.2 to 40 GPM and a recommended pressure range of 20 to 150 PSI. The flow-control stem supports zone balancing, reduction of excessive flow, or manual shutoff during service. The valve also uses a double-beaded diaphragm, reverse-flow solenoid design, internal and external manual bleed, and a standard encapsulated 24 VAC solenoid.

Key Features

• 1-inch slip inlet and outlet connections
• Integrated flow control
• Approximate flow range of 0.2 to 40 GPM
• Recommended pressure range of 20 to 150 PSI
• Temperature rating up to 150°F
• Double-beaded diaphragm
• Reverse-flow solenoid design
• External and internal manual bleed
• Standard encapsulated 24 VAC solenoid

Common Uses

• Residential sprinkler zones
• Light-commercial irrigation systems
• Solvent-weld PVC installations requiring flow adjustment
• Replacing a matching 1-inch slip PGV valve with flow control

Compatibility and Installation Notes

• Confirm the slip sockets match the planned 1-inch PVC piping.
• Install with the body flow arrow aligned with water movement.
• Follow the pipe and cement manufacturer’s solvent-weld preparation and cure-time instructions.
• Use with a compatible 24 VAC controller unless an approved alternate solenoid is installed.
• Size the valve according to design flow, pressure loss, available pressure, and downstream demand.
• Flush the piping before installation and provide service access in the valve box.

Frequently Asked Questions

Does PGV-101G-S include flow control?

Yes. Hunter identifies PGV-101-G-S as the slip-connection model with a flow-control stem.

Are these threaded connections?

No. Both the inlet and outlet are slip sockets intended for compatible solvent-weld piping.

Can the valve be used with a battery controller?

The included solenoid is 24 VAC. Supported battery-controller systems require a compatible Hunter DC-latching solenoid.

Why Buy from Big Frog Supply?

Big Frog Supply carries Hunter PGV valves, solenoids, diaphragms, pressure regulators, controllers, and irrigation repair components.